Konica Minolta 7085 Instruction Manual page 103

Output Mode for Machine with Finisher (continued)
1.
Close the RADF securely, then press [AUTO RESET].
The Sort mode using Primay (main) tray is initially selected.
Key Operator can change the initial output mode. See p. 13-10.
2.
Select the desired output mode.
To set Non-sort or Sort mode using Primary (main) tray: proceed to the next step.
To set Staple-sort mode using Primary (main) tray: proceed to step 4.
To set Group mode using Primary (main) tray or output to Secondary (sub) tray:
proceed to step 5.
3.
To set Non-sort or Sort mode:
Check that SORT is already highlighted on the Basic Screen in initial condition.
To select Non-sort mode, touch SORT to deselect it.
Proceed to step 6.
4.
To set Staple-sort mode:
(1) Touch STAPLE SORT on the Basic Screen to highlight it.
The staple position icon will be displayed in the output icon area.
(2) Touch OUTPUT MENU on the Basic Screen to display the Output Mode popup
menu.
HINT
3
C opying
Operations
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Paper Size
Lens Mode
Density
1-2, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
FS-111/211
Output Modes
Binding
Mode
Recalling
Previous Job
Check Mode
& Proof Copy
Interrupt
Mode
3-45