Paper Information; Paper Weight - Konica Minolta 7085 Instruction Manual

Paper Information

This machine is equipped with the following trays for loading copy paper.
• Tray 1, 2 and 3 (Main body tray)
• LCT (LT-402/LT-412 Large Capacity Tray)
• Multi-sheet bypass tray
Also, the following equipment is provided for conveying/delivering copies.
• ADU (Automatic Duplex Unit)
• Finisher (FS-111/FS-211)
• Cover Sheet Feeder (PI-108)
• Punching Unit (PU-108)
• Punching / Z-Folding Unit (PZ-108)
• Trimmer Unit (TU-108)
• Exit tray (for the machine without Finisher)
Refer to the following information on paper capacity for each.

Paper Weight

Paper Trays
Tray 1, 2, and 3
(Main body tray)
LCT (LT-402/LT-412)
Multi-sheet bypass tray
Equipment
ADU
Finisher
Cover sheet feeder
Punching unit
Punching/Z-Folding unit
Trimmer unit
Exit tray
• Some 170 g/m
• The tray specified as Thin or Tab paper cannot be used for duplex copying.
• LCT can be specified as Thick3, irrespective of paper weight, for paper that
11-2
60 ~ 90 g/m
91 ~ 170 g/m
171 ~ 200 g/m
50 ~ 59 g/m
91 ~ 170 g/m
60 ~ 90 g/m
91 ~ 200 g/m
50 ~ 59 g/m
91 ~ 170 g/m
60 ~ 200 g/m
50 ~ 200 g/m
60 ~ 90 g/m
50 ~ 200 g/m
50 ~ 170* g/m
60 ~ 90 g/m
60 ~ 90 g/m
50 ~ 200 g/m
DETAILS
2
paper types may not be punched easily.
has difficulty with toner fixation. See p. 13-23 ~p. 13-24.
Weight
2
2
for the tray specified as Thick1
2
for the tray specified as Thick2
2
for the tray specified as Thin
2
for the tray specified as Tab paper
2
2
when specified as Thick
2
when specified as Thin
2
when specified as Tab paper
Weight
2
2
2
for Stitch&Fold / Fold mode
2
2
2
for Z-Folding mode
2
2