Konica Minolta 7085 Instruction Manual page 241

Printing Stamp, Page, Date/Time onto Copies (Stamp) (continued)
When selecting DATE/TIME: Specify the date/time type, printing
position, character size and printed page.
Touch to highlight the desired date, time, and printing position keys on the screen. If
fine adjustment is required, touch FINE ADJ. OF POSITION to display the Fine
Adjustment Setting Screen. See p. 9-54 for details.
Touch CHARACTER SIZE/TYPE to select the character size (8pt, 10pt, 12pt or 14pt)
and type (GOTHIC or MING). See p. 9-55 for details.
Touch PRINTED PAGE to designate whether to print the selected stamp on the cover
only or on all pages.
5.
Touch OK.
The Stamp/Overlay Selection Screen will be restored.
Touch to select another stamp function key to use in combination, if desired.
6.
Touch OK on the Stamp/Overlay Selection Screen.
The Application Selection Screen will be restored.
7.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
8.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
9.
Position original(s) FACE UP in the document feeder or FACE DOWN
on the platen glass.
For details on positioning originals, see p. 3-2 to p. 3-6.
10.
Press [START].
When the finisher / trimmer unit / paper exit tray capacity is
exceeded due to the print quantity selected, remove the copied
sets as they exit; otherwise, mishandled paper will occur.
HINT
HINT
CAUTION
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Combination
Booklet
OHP
Interleave
Image Insert
Dual Page
Program Job
Non-Image
Area Erase
Reverse
Image
Repeat
9
Applications
Frame/Fold
Erasure
AUTO
Layout
Full-Image
Area
Image Shift
Reduce &
Shift
Stamp
Overlay
Overlay
Memory
9-53