Konica Minolta 7085 Instruction Manual page 171

• Tandem printing job cannot be started if 10 reserve jobs (not in tandem
mode) are entered on the secondary copier. Wait until the reserve jobs
are completed on the secondary copier.
• Selected tandem mode will be released automatically when the primary
copier activates Auto low power/Auto shut-off.
Press [POWER SAVER ON/OFF] to release Auto shut-off if required,
then select the tandem mode again to restart the procedure.
4.
Select the desired copying conditions on the primary copier.
Ordinary copying operation is still available on the secondary copier during
the tandem mode setting.
5.
Enter print quantity on the primary copier, using the keypad.
When a print quantity amount of 100 is entered, the primary and secondary copiers
will each copy and output 50 sheets.
• Print quantity must be set for [3] or more copies to activate the tandem
mode.
• When the print quantity entered is an odd number, the primary copier will
copy and output one sheet/set more than the secondary copier to
accommodate the job.
6.
Position original(s) FACE UP in the document feeder or FACE DOWN
on the platen glass of the primary copier.
See p. 3-2 to p. 3-6 for details on positioning originals.
7.
Press [START] on the control panel of the primary copier.
The Sub icon (
indicate that the two copiers will start working in tandem.
The tandem mode will be released automatically when tandem mode copying is
completed, and the Master and Sub icons on each Basic Screen will disappear.
If scanning of the next reserved job is performed during the tandem mode
copying, that job will also be performed in the tandem mode. Up to 10 jobs
including the present job can be reserved.
Interrupt mode during Tandem mode copying
Interrupt copying is available only on the copier with [INTERRUPT] pressed.
The tandem mode copying on the copier in interrupt mode will be suspended
until the interrupt copying is completed.
If the interrupt mode period is of long standing, the Allocation recovery
mode will activate to enable the other copier to handle the remaining print
quantity.
Using Two Copiers in Tandem (continued)
DETAILS
DETAILS
HINT
) will display on the Basic Screen of the secondary copier to
DETAILS: Entering reserve job during Tandem mode copying
Weekly
Timer
Rotation
Vertical/Hori-
zontal Zoom
Fold /
Stitch&Fold
Punch
Z-Fold
Trimming
Cover Sheet
Feeding
Using Finisher
Manually
Tandem Mode
7
A dvanced
Information
7-27