Konica Minolta 7085 Instruction Manual page 270

Storing Image Data While Copying (Image Store&Output) (continued)
3.
Enter the desired image data password in up to 8 characters from the
touch screen keypad.
To correct an entry, touch 1-CHARACTER DELETE repeatedly to delete each
character, then enter the correct password.
4.
If the password is correct, touch OK.
The Job Name Entry Screen will be displayed.
5.
Enter the desired job name in up to 8 characters from the touch
screen keypad.
To correct an entry, touch 1-CHARACTER DELETE repeatedly to delete each
character, then enter the correct job name.
6.
If the job name is correct, touch OK twice to return to the Basic
Screen.
The HDD icon is displayed in the message area of the Basic Screen.
7.
Select the desired copying conditions, then enter the desired print
quantity.
8.
Position original(s) FACE UP in the document feeder or FACE DOWN
on the platen glass.
See p. 3-2 to p. 3-6 for details on positioning originals.
9.
Press [START] to scan and then print.
When the Store mode is used, touch STORE on the Basic Screen to deselect the
Store mode when the store function is completed, i.e., after all originals are scanned,
then press [START] to print.
10-16
HINT