Konica Minolta 7085 Instruction Manual page 27

Table of Contents

Advertisement

CAUTION: Finisher Paper Exit Outlet
To avoid injury when stapling large size copies, DO NOT put your hand into the open
Paper Exit Outlet.
CAUTION: Fixing Unit
The internal fixing unit is very hot. To avoid getting burned, DO NOT TOUCH. Be
careful when withdrawing the fixing unit.
WARNING: Drum Unit
The internal drum unit generates a high voltage.
To avoid an electrical shock, DO NOT TOUCH.
CAUTION: Disposal of Copier
Do not dispose of this copier yourself. Contact your service representative, who can
arrange for its safe disposal.
If you change the place of installation, please contact your service representative.
CAUTION: Paper Capacity for the Exit Tray
The exit tray capacity is max. 150 sheets. If a copy run of more than 150 is required,
be sure to remove the copies from the exit tray before the maximum capacity is
reached. Failure to do so will cause the copier to jam.
CAUTION: FS-111/211 Finisher Paper Capacity
The FS-111 Finisher is equipped with two exit trays, and FS-211 Finisher is equipped
with three exit trays.
Select an exit tray and output mode on the Output Mode popup menu.
To prevent paper misfeed, do not exceed the paper capacity of the Finisher.
When the total number of copies in the copy run exceeds the capacity stated in Sec-
tion 11, be sure to unload the exit tray while the copier is still copying. Failure to do so
will cause the copier to jam.
CAUTION: FS-111/211 Finisher Primary (Main) Tray
When printed materials are removed from the primary (main) tray of the Finisher, the
tray goes up automatically. To avoid injury, DO NOT put your hand on top of the
printed sheets. Be sure to hold both sides of the printed sheets when removing them,
and DO NOT leave your hand on the printed sheets while the primary tray goes up.
Requirements for Safe Use (continued)
1
Safety
Information
1-11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents