Konica Minolta 7085 Instruction Manual page 62

Positioning originals in Z-Folded original mode
Z-Folded original mode detects the folded original size without using the size detection
sensor of the RADF.
To use the Z-Folded original mode, see procedure on p. 8-8 to p. 8-9.
1.
Arrange originals in order.
2.
Position original(s) FACE UP in the document feeder tray.
Place two-sided originals with page one FACE UP.
Up to 100 originals can be set at a time.
• Before placing originals in the tray, be sure the document feeder is closed
• Be sure not to use unsuitable RADF originals. See p. 11-8 for details.
3.
Adjust paper guides.
3-4
Positioning Originals (continued)
HINT
Reminder!
fully. Once closed, do not open the document feeder, otherwise the
selected copy conditions may be altered automatically.