Output Z-Folded Copies (Z-Fold); O Utput Z-Folded Copies (Z-Fold) - Konica Minolta 7085 Instruction Manual

Output Z-Folded Copies (Z-Fold)

The Z-Fold mode is available only when PZ-108 Punching/Z-Folding unit option is
installed on the FS-111/FS-211 Finisher.
When the Z-Fold mode is selected in combination with any of the Primary (main) tray
output modes, the original image is copied on A3/B4 copy paper and output to the
Primary (main) tray of the Finisher according to the selected output mode.
>>>Specifications for Z-Fold Mode<<<
❒ Folding type:Z-folding
❒ Copy paper size: A3, B4 (60 ~ 90 g/m
❒ Folded width*: 209 mm or less for A3
❒ When using Mixed Original mode with Z-Fold mode, A3 and B4 originals should not
be mixed, otherwise the Z-Fold mode may not function properly.
❒ Special paper type (Thick 2, OHP film, labels, tabbed sheets) and non-standard size
(STD size (special), Non STD size, Wide paper) cannot be Z-folded. Using special
paper willl cause the machine trouble.
Some plain paper types may cause folded line to shift in Z-Fold mode.
❒ Incompatible Conditions: Using platen glass (available when platen memory copy is
selected), Staple-sort using B4, Output to Secondary (sub) tray, Fold, Stitch & Fold,
Trimming, Tandem mode, OHP Interleave
❒ When using Z-fold, Staple-sort and APS for mixed size originals, heed the following
limits on capacity:
Number of Z-folded sheets
7-14
All other paper sizes will be output without Z-fold or double-fold.
181 mm or less for B4
*The width from the paper edge to the first folded line
Capacity for Mixed Size Originals
using Z-Folding and Staple-Sort with APS
Capacity for one stapled set
Number of regular sheets
1 sheet
2
3
4
5
6 or more Staple-Sort is unavailable with Z-Folding.
Z-Folding
2
paper)
Primary Tray Capacity
1 ~ 40 sheets 20 stapled sets
0 ~ 30
0 ~ 20
0 ~ 10
0
Z-Folding + Staple-sort
+ APS with Mixed Original
10
4
3
2