Konica Minolta 7085 Instruction Manual page 115

Storing Job Conditions (Job Memory: Job Store) (continued)
4.
Review the settings on the Job Store Check Screen.
Check that the selections made in step 1 are correctly entered.
If any correction is required, touch CANCEL to return to the Basic Screen.
Make new selections, then restart the Job Store operation from step 2.
5.
Touch OK.
The Job No. Selection Screen will be restored.
To suspend the storing job after step 6, press [AUTO RESET].
Job Memory mode will be cancelled, and the Basic Screen will return from
any screen.
6.
Touch to highlight one of the keys numbered from 1~30 to store the
job under that number.
The screen displays 15 job number keys. The arrow key at the lower left corner can be
used to scroll to the next/previous page.
A blank key indicates that no job is stored under that key, and a named job without a
lock icon ( ) displayed can be overwritten.
The key with a lock icon (
To lock or unlock a job, and to delete a locked job, see p. 13-22.
If you wish to cancel the job number selection, touch CANCEL to restore the
Basic Screen, which displays the settings made in step 1.
If you wish to cancel the settings, press [AUTO RESET].
DETAILS
DETAILS
) displayed is locked and cannot be selected.
HINT
DETAILS
4
Job Memory
&Help Mode
Job Memory
Help Mode
4-3