Konica Minolta 7085 Instruction Manual page 193

Inserting Sheets and Covers (Sheet/Cover Insertion) (continued)
6.
When selecting Insertion mode:
Enter the page number.
Touch to select the desired insertion mode, then use the control panel keypad to enter
the page number of insertion location.
Touch SET after each entry to move to the next key.
To clear an incorrect entry, touch DELETE. The insertion location will be deleted.
See p. 9-6 for details on entering page numbers.
7.
Touch CHANGE INSERTION TRAY to select the insertion tray source.
The tray source for covers currently selected is displayed on the Sheet/Cover Insertion
Screen.
Every touch of the key shifts the selection in the display that includes paper type as
specified in Key Operator mode.
8
. When all settings are completed, touch OK to return to the Basic
Screen.
9.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
10.
Position originals FACE UP in the document feeder.
• For details on positioning originals, see p. 3-2.
• Use RADF store mode (p. 3-32 to p. 3-33) when the original count
exceeds 100.
11.
Press [START].
When the finisher / paper exit tray capacity is exceeded due to
the print quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.
HINT
HINT
HINTS
CAUTION
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Combination
Booklet
OHP
Interleave
Image Insert
Dual Page
Program Job
Non-Image
Area Erase
Reverse
Image
Repeat
9
Applications
Frame/Fold
Erasure
AUTO
Layout
Full-Image
Area
Image Shift
Reduce &
Shift
Stamp
Overlay
Overlay
Memory
9-5