Konica Minolta 7085 Instruction Manual page 226

Eliminating Black Copy Marks Along Borders (Frame/Fold Erasure) (continued)
3.
Touch to highlight the desired mode key.
Touch Frame Erasure (All sides), Frame Erasure (Each side), or Fold Erasure to
highlight it.
Either Frame erasure mode and Fold erasure can be selected in combination.
4.
Specify the erasure amount in the selected mode.
To specify Frame Erasure (All sides) amount:
• Touch to highlight FRAME, if not highlighted, then use the touch screen keypad or
up/down arrow key to enter the desired erasure amount of the UP, DOWN, LEFT,
and RIGHT sides collectively, from 1 to 300mm in 1mm increments.
To specify Frame Erasure (Each side) amount:
• Touch to highlight FRAME, if not highlighted, then touch UP SIDE, RIGHT SIDE,
DOWN SIDE, or LEFT SIDE. The selected side amount will be highlighted in the left
illustration area of the screen.
Use the touch screen keypad or up/down arrow key to enter the desired erasure
amount, from 1 to 300mm in 1mm increments.
9-38