Konica Minolta 7085 Instruction Manual page 323

Inserting a New Staple Cartridge into FS-111/211 Finisher (continued)
FS-211: Remove the empty cartridge from the cartridge housing.
Do not remove the staples remaining inside the housing; otherwise, the first
sheet output after the replenishment will not be stapled.
5.
Insert the new cartridge into the housing.
Firmly insert the cartridge into the housing while the arrow indication on the cartridge
appears as shown below.
6.
FS-111: Remove the lock tape from the cartridge, then close the
bottom of the housing.
Reminder!
2
FS-111
1
FS-211
Adding Toner
Inserting New
Staple Cartridge
Empty Trash
Basket
Cleaning
Scanning
Section
Checking
Copy Count
12
Maintenance
& Supplies
12-7