Konica Minolta 7085 Instruction Manual page 322

Inserting a New Staple Cartridge into FS-111/211 Finisher (continued)
3.
Pull up the cartridge housing, then remove it while sliding it along the
stapler rail.
4.
FS-111: Open the bottom of the cartridge housing, then remove the
empty cartridge.
Open the bottom of the cartridge housing while pressing two locks on both sides.
Do not remove the staples remaining inside the housing; otherwise, the first
sheet output after the replenishment will not be stapled.
12-6
1
2
Reminder!
FS-111
FS-211
1
2
FS-211