Form - Konica Minolta 7085 Instruction Manual

6.
Position SDF original FACE UP in the document feeder.
In Normal SDF mode:
Position a sheet of the original in the document
feeder.
Never set more than one thick original or paste
up, otherwise machine trouble may be caused.
Auto Start mode with RADF store mode:
Adjust the paper guides according to the original size to be set, then position a sheet
of original in the document feeder.
The set original will be automatically fed and scanned.
Never set more than one original, otherwise machine trouble may be caused.
When scanning is completed, touch STORE to exit the RADF store mode.
7.
Press [START].
In normal SDF mode, the original will be fed and scanned, then the printing job will
start in succession when the machine becomes ready for output.
In Auto Start mode with RADF store mode, the printing job will start immediately.
When the finisher / trimmer unit / paper exit tray capacity is
exceeded due to the print quantity selected, remove the copied
sets as they exit; otherwise, mishandled paper will occur.
Feeding Single Original from RADF (SDF) (continued)
CAUTION
Original
Direction
Text/Photo
Enhance
Mixed
Original
Z-Folded
Original
SDF
Original

Form

8
Special
Original
8-11