Weekly Timer - Konica Minolta 7085 Instruction Manual

Procedure
1 Touch [2] Copier Initial setting on the Key Operator Mode Screen to display the Copier
Initial Setting Screen.
2 Make a selection for each mode as initial settings.
Touch RADF to select or deselect it.
NOTE:
The machine will restore the initial settings specified as above unless the
Memory switch No. 4 "JOB memory (30) auto recall" is turned ON with the
Job memory No. 30 registered.
3 Touch OK to complete the setting and return to the Key Operator Mode Screen.
4 If no further changes are required, touch PREVIOUS SCREEN to restore the Basic
Screen to perform copying operations.
[2] Copier Initial Setting (continued)
Key Operator
Mode
System Initial
Setting
Copier Initial
Setting
User Setting
Mode
E.K.C.
Lock/Delete
Job Memory
Paper Type/
Special Size
Panel Contrast/
Key Sound
Key Operator
Data Setting
Weekly
Timer
Control Panel
Adjustment
Tray Auto
Select Setting
Power Save
Setting
Memory
Switch
Machine
Management
List Print
Call Remote
Centre
Side 2 Lens
Adjustment
Finisher
Adjustment
HDD
Management
Scan
Transmission
Non-Image
Area Erase
Timing
Adjustment
Centring
Adjustment
13
Key Operator
Mode
13-11