To Change The Settings - Konica Minolta 7085 Instruction Manual

Checking Feature Selections and Proof Copying (continued)
4.

To change the settings:

Touch the desired copying condition key on the Check Screen to highlight it.
Any key that cannot be highlighted indicates that the copying condition cannot be
changed from the Check Screen.
Touch CHANGE SETTING.
The LCD will display an appropriate screen to change the copying condition selected.
• Selecting a basic copying condition key will display the Basic Screen.
• Selecting Enhance Mode, Special Orig., or Original key will display the
Special Original popup menu.
• Selecting an application function key will display the Change Application
Selection Screen.
When BOOK MARK has been checked on a subsequent screen, selecting
the application function key will jump to that screen. See p. 9-2 for details.
• CHANGE SETTING will not function for the following application
functions, however they can be released by touching RELEASE
SETTING: Non-Image Area Erase, Reverse Image, AUTO Layout, Full-
Image Area, Overlay.
Change the setting as desired, then restore the Check Screen to return to the checking
steps.
From the Basic Screen, press [CHECK] to return to the Check Screen.
From the Special Original popup menu or Change Application Selection Screen, touch
OK to return to the Check Screen.
• When making a set or sample copy, proceed to step 6.
• To start printing without proofcopying, proceed to step 8.
5.
To release the settings:
Touch the desired copying condition key on the Check Screen to highlight it, then touch
RELEASE SETTING.
The confirmation screen will appear on the Check Screen.
Touch YES to cancel the function, or NO to restore.
• If making a sample copy, proceed to the next step.
• To start printing, proceed to step 8.
DETAILS
3
C opying
Operations
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Paper Size
Lens Mode
Density
1-2, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
FS-111/211
Output Modes
Binding
Mode
Recalling
Previous Job
Check Mode
& Proof Copy
Interrupt
Mode
3-51