Konica Minolta 7085 Instruction Manual page 304

Transmitting/Editing Machine Setting File (Environment Setup) (continued)
The result message will be displayed when the registration is completed.
If the registration cannot be completed successfully, an error messages will
be displayed as follows.
• Can't transfer data (The machine is busy)
• The data cannot be recognized
• Data size is too large
• The data cannot be registered
• Save the file as a text.
• Begin the file with a specified tag. (ex. #EKC_TAB)
• A line should be 300 bytes or less.
• The file size should be 100,000 bytes or less.
• The line that begins with "#" is a comment.
ex. Machine setting file of an E.K.C. data
10-50
DETAILS: Error Message
Try again to import the data after the machine operation in progress is
completed.
Confirm that the data is the machine setting file.
Confirm that the data is the machine setting file.
Check if the file size exceeds 100,000 bytes.
Check if inappropriate description is made in the machine setting file.
See p. 10-53 for details.
Check if the file entries are already over the limit.
DETAILS: To Edit the Machine Setting File