Konica Minolta 7085 Instruction Manual page 100

Output Mode for Machine without Finisher (continued)
4.
Enter the desired print quantity from the control panel keypad.
• See p. 11-3 to be sure that the exit tray capacity is not exceeded.
• See p. 3-7 for details on setting print quantity.
5.
Position original(s) FACE UP in the document feeder or FACE DOWN
on the platen glass.
See p. 3-2 to p. 3-6 for details on positioning originals.
6.
Press [START].
Press [STOP] to suspend the scanning or printing job.
When the paper exit tray capacity is exceeded due to the print
quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.
3-42
HINTS
HINT
CAUTION
DETAILS: Output Icons on the Basic Screen
Face Down
Non-sort Rotation sort
Face Up
Non-sort Rotaion sort
Group Rotation group
Group Rotation group