Re-Install The Network Driver; Graphics Accelerator Driver; Installing Scsi Controller Driver (N8103-95/N8190-126; Installing Scsi Controller Driver (N8103-75 - NEC Express5800 140Rd-4 User Manual

(floppy, CD-ROM...)] check box.
6.
Check the [Include this location in the search] check box and when using [(N8104-86/111)], specify :
– [CD-ROM driveletter:\WINNT\W2K3AMD\NS1\PRO1000\WS03_32E]
when using [(N8104-112/103/113)]
– [CD-ROM driveletter:\WINNT\W2K3AMD\NS1\PRO100\WS03_32E].]
when using [(N8104-86/111)]
Then click [Next].
7.
Click [Finish].

Re-install the Network Driver

The network driver will be installed automatically.

Graphics Accelerator Driver

The standard graphics accelerator driver installed by "Update Express5800 system" is automatically installed.
The following is the procedure when it is necessary to install manually.
If you want to utilize optional Graphics Accelerator Driver board, follow the document attached to the board to install the
driver.
1.
Insert the EXPRESSBUILDER CD-ROM into the CD-ROM drive.
2.
Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer].
3.
Run "Setup.exe" in the following directory.
<CD-ROM Drive Letter>:\WINNT\W2K3AMD\VIDEO\setup.exe.
4.
Follow the message to continue the installation.
If the dialog message "Digital Signature could not been found." appears, select [Yes] to continue.
5.
Remove the EXPRESSBUILDER CD-ROM from the CD-ROM drive, follow the on-screen instructions and restart
the system.

Installing SCSI Controller Driver (N8103-95/N8190-126)

The SCSI controller driver will be installed automatically.

Installing SCSI Controller Driver (N8103-75)

If you utilize SCSI controller driver (N8103-75), update your system with EXPRESSBUILDER CD-ROM attached to your
system.
The SCSI controller driver will be installed automatically.

Installing Disk Array Controller Driver

To additionally install the disk array controller in a system containing Windows Server™ 2003, connect the controller and take
the following steps to install the driver:
1.
When the [Found New Hardware Wizard] dialog box appears, click [Next].
2.
When the [Install Hardware Device Drivers] dialog box appears, select [Search for a suitable driver for my device
(Recommended)], and click [Next].
3.
When the [Locate Driver Files] dialog box appears, select [Floppy disk drives], insert "Windows Server™ 2003 x64
D-9