6-10
modify/newly create [Configuration Diskette] during the setup with EXPRESSBUILDER.
Creating Configuration Diskette
This section describes about specifying setup information that is necessary for operating system installation and creating
[Configuration Diskette]. Follow the procedure below.
NOTE: In the procedure below, the folder name that is specified when installing Trekking
command is assumed as [Configuration Diskette Creator].
1.
Start the operating system.
2.
Insert the EXPRESSBUILDER CD-ROM into the CD-ROM drive.
Master Control Menu will appear.
3.
Right-click on the screen or left-click [Software Setup]. The menu will appear.
4.
Click [Configuration Diskette Creator].
Configuration Diskette Creator window is displayed.
5.
Click [Create New Information files] from the [File] menu.
The [Disk Environment] dialog box will be displayed.
6.
Specify each item and click [OK].
The dialog boxes to specify setup information will be displayed in order, such as [Basic Information] dialog box.