Installing Scsi Controller Driver (Scsi U160 Pci-Atx-64B; Installing Disk Array Controller Driver (Securaid 321; Setting For Collecting Memory Dump (Debug Information - NEC Express5800 140Rd-4 User Manual

The installation of the driver is completed.
Restart the system according to the message appeared on the screen.

Installing SCSI Controller Driver (SCSI U160 PCI-ATX-64b)

If you use SCSI controller driver (SCSI U160 PCI-ATX-64b), update your system with EXPRESSBUILDER CD-ROM
attached to your system.
The SCSI controller driver will be installed automatically.

Installing Disk Array Controller Driver (SecuRAID 321)

To additionally install the SecuRAID 321 in a system containing Windows Server™ 2003, connect the controller and take the
following steps to install the driver:
1.
When the [Found New Hardware Wizard] dialog box appears, click [Next].
2.
When the [Install Hardware Device Drivers] dialog box appears, select [Search for a suitable driver for my device
(Recommended)], and click [Next].
3.
When the [Locate Driver Files] dialog box appears, select [Floppy disk drives], insert "Windows Server™ 2003
OEM-DISK for EXPRESSBUILDER" into the floppy disk drive, and click [Next].
4.
When the [Driver Files Search Results] dialog box appears, click [Next].
5.
Copying of the driver is completed, and the [Completion of the new hardware detection wizard] dialog box below
appears. Click [Complete].
SETTING FOR COLLECTING MEMORY DUMP
(DEBUG INFORMATION)
Set for collecting memory dump using the procedure described in Chapter 5.
E-9