Table of Contents
Advertisement
E-10
Network Driver
Specifying the details of network driver.
Two standard network drivers that are mounted will be installed automatically, but the link speed and Duplex mode
need to be specified manually.
[When PROSet is not installed]
1.
The [Local Area Connection Properties] dialog box is displayed.
* Procedure with the standard start menu
1. Click Start, Click [Control Panel], Click [Network Connections], and Click [Local Area Connection].
* Procedure with the classic start menu
1. Click Start, [Settings] and click [Network Connections].
The [Network Connections] dialog box is displayed.
2. Right-click [Local Area Connection] and click [Properties] from drop down menu.
2.
Click [Configure].
The property dialog box for network adapter is displayed.
3.
Click [Advanced] and specify [Link Speed & Duplex] value the same as the value specified for the HUB.
4.
Click [OK] on the property dialog box for network adapter.
[When PROSet is installed]
1.
The [Intel PROSet] dialog box appears.
* Procedure with the standard start menu
Click Start, point to [Control Panel] and click [Intel PROSet].
* Procedure with the classic start menu
1. Click Start, point to [Settings] and click [Control Panel].
2. Double-click [Intel(R) PROSet] on the [Control Panel] window.
2.
Click [(Network Adapter Name)] in the list.
3.
Click [Speed] and specify [Link Speed & Duplex Settings] value the same as the value specified for the HUB.
4.
Click [Apply] and click [OK].
Specify the other network driver the same as above.
Also, add or delete any protocols and services if necessary.
You can operate the process on the property dialog box for local area network which can be displayed from [Network
and Dial-up Connection].
NOTE: We recommend you add "Network Monitor" at "Adding Services".
"Network Monitor" can monitor frames (or packets) sent or received by a computer on
which "Network Monitor" is installed. This is an effective tool for analyzing network faults.
For information about the installation procedure, see Chapter 6.
Re-install the Network Driver
The network driver will be installed automatically.
Advertisement
Table of Contents
