Re-Install The Network Driver - NEC EXP200 User Manual

You can operate the process on the property dialog box for local area network which can be
appeared from [Network and Dial-up Connection].
NOTE:
Services]. [Network Monitor] can monitor the frame (or the packet) that
the computer installing [Network Monitor] sends or receives. This tool
is valuable when analyzing network trouble. For information on how to
install the tool, see the "Setting for Solving Problems" described later in
this chapter.

Re-install the Network Driver

Optional Network Board Driver
If you want to utilize optional Network Board (N8104-112/103/113/121/86/111), the network driver
will be installed automatically. Therefore, the driver attached to the Network board should not be
used.
In case of utilizing (N8104-112/103/113/121)
"CD-ROM Drive Letter:\WINNT\W2K3AMD\NS1\PRO1000\WS03_32E"
In case of utilizing (N8104-86/111)
"CD-ROM Drive Letter:\WINNT\W2K3AMD\NS1\PRO100\WS03_32E"
If the procedure of installation is not clear, refer to the installation procedure described in the
section "Installation of the Optional Network Board Driver".
Installation of the Optional Network Board Driver
1.
Start Device Manager.
2.
Click [Network adapters] and double-click [(Network Adapter Name)].
[(Network Adapter Name) Properties] appears.
NOTE:
other names show the Optional Network Board.
3.
Click the [Driver] tab and click [Update Driver...].
[Hardware Update Wizard] appears.
4.
Select the [Install from a list or specific location (Advanced)] radio button and click
[Next].
5.
Select the [Search for the best driver in these locations] radio button and check off the
[Search removable media (floppy, CD-ROM...)] check box.
Installing Windows Server 2003 x64 Editions D-13
We recommend you to add [Network Monitor] at [Adding
[(Intel (R) PRO/1000...)] is the name of On-Board adapter. All