Pci Board - NEC Express5800 140Rd-4 User Manual

9-20

PCI Board

T he server contains s ix slots for PCI board, and three slots for PCI-Express board.
S ome PCI boards support the hot-plug function by which they may be installed or removed with the po
on . Your server supports the hot-plug function if Windows Server 2003 or Windows 2000 is used as operating system. The PCI
bo ards supporting the hot-plug function only include the 100BASE-TX Adapter and the 1000BASE-T Adapter.
IMPORTANT:
metal frame of the server to discharge static electricity from your body before handling the PCI
board. Do not touch the PCI board terminals or on-board parts by a bare hand or place the PCI
boar d directly on the desk. For static notes, see the section "Anti-static Measures".
NOTE:
The tab on the PCI board slot indicates hot-plug or non-hot-plug by its colour. Hot-plug
slot has a g reen tab (PCI slot #4 through #9), and non-hot-plug slot has a blue tab (PCI slot #1
through #3).
There are three types of PCI boards: 5V PCI bo
A 5V PCI board must be installed in the 5V PCI slo
PCI board can be installed in any PCI slot.
5V PCI board
The PCI-Express boards are x1, x4, x8, and x16. The server can contain x1, x4, and x8 PCI-Express board.
PCI-Express board (x4)
The PCI board is extremely sensitive to static electricity. Make sure to touch the
ards, 3.3V PCI boards, and universal PCI boards.
t, and a 3.3V PCI board must be installed in the 3.3V PCI slot. A universal
3.3V PCI board
PCI-Express board (x
wer of the server being
Non-hot-plug PCI board slots
(color: blue)
Hot-plug PCI board slots
(color: green)
PCI #1, #2 (32-bit/33MHz, 5V PCI)
PCI #3 (PCI-Express (x4))
PCI #4, #5 (PCI-Express(x8))
PCI #6, #7, #8, #9
(64-bit/100MHz, 3.3V PCI-X)
Universal PCI board
8)