NEC Express5800 140Rd-4 User Manual page 59

IMPORTANT: If a noisy sound in driving the CD-ROM drive occurs after setting a CD-ROM, set
it again correctly.
To take out the CD-ROM from the CD-ROM drive, press the CD tray eject button in the similar way in setting the CD-ROM to
make t he tray go out. (If the access lamp is lit in orange, the CD is being accessed and CD tray eject button is disabled.) Some
o perating systems have a command to eject a tray.
A fter taking out the CD-ROM, return the tray into the drive.
When you fail to eject the CD-ROM tray with the CD tray eject
p rocedure below.
1.
Press the POWER switch to power off the server. (The POWER/SLEEP lamp goes off.)
2.
Insert a metal pin of approximately 1.2 mm in diameter and 100 mm in length (a straightened large paper clip will
ma e a substitute) into the emergency hole on the upper front of the CD-ROM drive and gently push it in until k
tra is ejected. y
IMPORTANT:
Do not use a toothpick or plas
If the above procedure does n
representative.
3.
Hold the tray and pull it out.
4.
Take out the CD-ROM.
5.
Push the tray back into position.
button and take out the CD-ROM from the server, follow the
tic stick that is easy to break.
ot let you take out the CD-ROM, contact your service
2-29
the