Using Your Server; Front Bezel - NEC Express5800 140Rd-4 User Manual

USING YOUR SERVER
T his section describes basic operations of your se
B for notes on using CD-ROM, and accessories including the keyboard and the mouse.

Front Bezel

R emove the front bezel to power on/off the server, to access CD-ROM drive, and to install/remove hard disks to the 3.5-inch
h ard disk bay.
IMPORTANT:
Installing or Re moving the Front Bezel
When turning the power of the server on/off, accessing to the CD-ROM drive, or installing or removing a hard disk on or from
the 3.5-inch hard disk bay, first remove the front bezel.
IMPORTANT:
security key.
1.
Insert the attached security key into the key slot and turn the key to the front bezel side with it pressed lightly to
release the lock.
2.
Hold the right end of the front bezel lightly to pull it toward you.
3.
Slide the front bezel to the left a little to remove the tab from the frame and then remove the front bezel from the
ser er. v
Tabs
To instal l the front bezel, latch the tab at the left side of the front bezel on
lock the front bezel by using the key for security.
rver including how to use devices such as the CD-ROM drive. See Appendix
To open the front bezel, you must unlock the door with the provided security key.
The front bezel can be opened on
Frame
ly when you unlock it by using the attached
the server frame. After the installation,
2-21