D-14 Installing Windows Server 2003
NOTE:
[AddingServices]. [Network Monitor] can monitor the frame (or the
packet) that the computer installing [Network Monitor] sends or
receives. This tool is valuable when analyzing network trouble. For
information on how to install the tool, see the "Setup for
TroubleProcess" later in this document.
Re-install the Network Driver
The network driver will be installed automatically.
Update Graphics Accelerator Driver Mounted in Standard
1.
Insert the NEC EXPRESSBUILDER CD-ROM into the CD-ROM drive.
2.
Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer]
3.
Run "SETUP.EXE" in the following directory.
<CD-ROM Drive Letter>:\WINNT\VIDEO\RADEON7000\W2K3\SETUP.EXE
*
communicate your server with the remote KVM console. (Optional advanced remote
management card (N8115-02) must be installed in your server to use the remote KVM
console.)
<CD-ROM Drive Letter>:\N8115-02\VIDEO\RADEON7000\SETUP.EXE
4.
Follow the message to continue the installation.
5.
Remove the NEC EXPRESSBUILDER CD-ROM from the CD-ROM drive, follow the
direction on the screen and restart the system.
SETTING FOR COLLECTING MEMORY DUMP
(DEBUG INFORMATION)
Set for collecting memory dump using the procedure described in Chapter 5.
We recommend you to add [Network Monitor] at
Install the graphics accelerator driver in the following directory if you