Table of Contents
Advertisement
User Guide
■ Procedure with the standard start menu: click Start menu, [Control
■ Procedure with the classic start menu:
a. Click Start menu, Click [Settings] and Click [Network Connections].
b. Right-click [Local Area Connection] and click [Properties] from pop-
2. Click [Configure].
The property dialog box for the network adapter is displayed.
3. Click [Advanced] and specify the same value for [Link Speed & Duplex] and
for the HUB.
4. Click [OK] on the property dialog box for network adapter.
[When PROSet is installed]
1. The [Intel PROSet] dialog box appears.
* Procedure with the standard start menu
* Procedure with the classic start menu
a. Click Start menu, point to [Settings] and click [Control Panel].
b. Click [Administrative tools].
c. Click [Computer Management] and double click the [(Network Adapter
2. Click [(Network Adapter Name)] in the list.
3. Click [Speed] and specify the same value for [Link Speed & Duplex] and for
the HUB.
4. Click [Apply] and click [OK].
Also, add or delete any protocols and services if necessary.
You can operate the process on the property dialog box for local area network which
can be displayed from [Network and Dial-up Connection].
[AddingServices]. [Network Monitor] can monitor the frame (or
the packet) that the computer installing [Network Monitor] sends
or receives. This tool is valuable when analyzing network
trouble. For information on how to install the tool, see the
"Setup for TroubleProcess" later in this document.
Re-install the Network Driver
The network driver will be installed automatically.
Panel], [Network Connections], and [Local Area Connection].
The [Network Connections] dialog box is displayed.
up menu.
Click Start menu, point to [Control Panel], [Administrative tools], and
click [Computer Management] and then double click the [(Network
Adapter Name)] in the Network Adapter list.
Name)] in the Network Adapter list.
Note: We recommend you to add [Network Monitor] at
272
www.nec-computers.com
Advertisement
Table of Contents
