Processor Board - NEC Express5800 140Rd-4 User Manual

9-48

Processor Board

T o install or remove the processo
R emo val
R emove the proce ssor board as described in the following procedure.
IMPORTANT:
touch the metal frame of the server to discharge static electricity from your body before handling
the processor board. Do not touch the processor board terminals or on-board parts by a bare hand
or pl ace the processor board directly on the desk. For static notes, see the section "Anti-static
Mea sures" described earlier.
1.
See the s ection "Preparing for Installation and Removal" described earlier to prepare.
2.
Unlock t he front bezel with the security key, and
3.
Remove the memory board cover.
4.
Re ove the two screws and then remove the processor board cover. m
5.
Remove the two screws securing the ejector.
6.
Unlock the processor board and open the ejector.
r, remove the processor board.
The processor board is extremely sensitive to static elect
remove the front bezel.
ricity. Make sure to