NEC Express5800 140Rd-4 User Manual page 71

8.
Install the cable arm on the rear of the server with one screw (B).
Screws (B)
9.
Install the arm bracket on the mount face at the rear of the rack.
NOTE:
Installation procedure for arm bracket depends on the distance between the mount faces
at the front and rear of the rack.
For the distance between the mount faces at the front and rear of the rack being 700 or 760 mm:
Fix the arm bracket to the core nuts installed on the mount face of the rear of the rack with two screws (A) in the
direction as shown in the figure below.
Mount face
Mount face
3-11