Using Remote Management Console - NEC Express5800 140Rd-4 User Manual

4-44
If you access the login page without installing the product mentioned above, you may see a dialog box for security warning.
Read the message and take actions according to the message.

Using Remote Management Console

Overview
You can control power-on/off of a server and use Remote KVM Console from a web browser by using the web server
functions of BMC. This function is achieved through Java Applet.
Connecting to the Web Server from a Web Browser on the Management PC
Access the following URL from the web browser in the management PC.
URL: http://BMC_HostPort/index.htm
NOTES:
"BMC_HostPort" is a colon and port number added after the BMC address or host name.
If the http port number is 80h (default), you can skip a port number.
When you use DHCP functions as well as performing auto registration to the DNS server, the
BMC default name is "ARMC"+MAC Address.
There is the MAC address on the Management Main Card.
If you want to use the Remote Management Function with DHCP disabled, first use the default
IP address "192.168.1.1" and make access in a local network where this IP address is available,
and then adjust configurations such as IP address according to your network environment. For
information on configuration, see "BMC Configuration" described later in this section.
When you use the Remote Management Function for the first time, you may see a dialogue box for security warning as shown
below. Read the message well and click either "Yes" or "Always." If you are not sure about the information, select "No."
NOTE:
When a connection is done with SSL, you may see some security warning dialogue
boxes.
IP address: 192.168.1.1
User name: Administrator
Password : (none)
Host name: ARMC00004C9FXXXX
Default host name