NEC Express5800 140Rd-4 User Manual page 101

Option Parameter
Hot Key [L]
(CTRL+ALT+) Z
Secure Mode Boot [Disabled]
Enabled
Video Blanking [Disabled]
Enabled
Floppy Write [Disabled]
Protect Enabled
Power Switch [Disabled]
Inhibit Enabled
NOTE:
The Secure Mode is used to restrict access from unauthorized users. In the Secure Mode,
the POWER switch, SLEEP switch, RESET switch, keyboard and mouse are disabled. The lamps
on the keyboard flash in order from the ScrollLock lamp, the CapsLock lamp, and the NumLock
lamp. To resume server operation in the normal state from the Secure Mode, enter the user
password from the keyboard and press Enter key.
Description
Specify the key with which the secure mode is started. Press the
selected key with the Ctrl and Alt pressed to start the secure mode.
Specify whether the server is operated in the secure mode at the start
of the server.
Specify whether the monitor is disconnected if the server is entered
into the secure mode.
Specify whether data write to the floppy disk inserted into the floppy
disk drive is enabled or disabled in the secure mode.
Specify whether the power switch is enabled or disabled. If this item is
set to "Enabled," the power cannot be turned off by using the POWER
switch (including the forced shutdown). The system cannot also enter
the power saving mode by pressing the SLEEP switch.
4-19
Your Setting
[ ]: Factory-set