NEC Express5800 140Rd-4 User Manual page 264

9-16
Removal
R emove the 3.5-inch d evice in the following procedure.
1.
Shutdown the system and press the POWER switch to turn of
2.
Se the section "Preparing for Installation and Removal" described earlier to prepare. e
3.
Unlock the front bezel with the security key, and remove the front bezel.
4.
Re ove a screw and pull the device with tray out from the 3.5-inch device bay. m
5.
Disconnect the SCSI cable and power cable f
6.
Remove the device from the additional tray.
f the power.
rom the device, and attach the connector covers to t hem.