NEC Express5800 140Rd-4 User Manual page 54

2-24
For example, the SCSI BIOS setup utility must be used in the following cases:
I nstallation of an SCSI device in the 3.5-inch device bay
C onnection of an external SCSI file device (The removal of the SCSI cable
and the connection of the SCSI cable coming with the server (for external connection) are required.)
Mo dification of SCSI device connections within the server
If the SCSI BIOS setup utility is terminated, the server runs POST from its start
When mo re than one SCSI controller boards are installed on the PCI bus of the
star ts of the SCSI BIOS setup utilities for the installed boards appear in the following order:
PCI slot number PCI #3, PCI #4, PCI #5, PCI #8, PCI #9, PCI #6, PCI #7, on-board RAID controller ;PCI #1 and
PCI #2. See Chapter 9, List of Optional Devices and their Available Slots for details of boot priority.
3.
Displa ys the SCSI ID numbers used by the connected SCSI devices on the screen.
4.
If on e or more disk array controllers are installed, displays the message prompting you to start the Disk Array BIOS
setu p utility.
Sta t the utility according to the message if you need to change the settings. Refer to the manuals of the d r
co trollers for details. n
W hout any entry, any of the following messages appears. it
NOTE:
When you press Ctrl and any other keys during POST to start configuration utility or others, the
key entry rarely becomes invalid. If it occurs, press Ctrl again to resume
5.
Dis plays the message notifying you of the detection of the processor and the
6.
Displays any of the foll
Pattern 1:
Press <F2> to enter SETUP or <F12> to Network
Pr ess <F2> to enter SETUP, <F4> Service Partition,
Pattern 3:
Press <F1> to resume, <F2> to enter Setup, <F12> to Network
Press <F1> to resume, <F2> to enter Setup, <F4> Service Partition, <F12> Network
ma y vary depending on the device status.
owing messages.
for 3.5-inch file device in the server
again.
server, the messages indicating the
the operation.
connected keyboard and mouse.
<F12> to Network
isk array
Pattern 2:
Or
Pattern 4:
* The displayed messag e