NEC Express5800 140Rd-4 User Manual page 234

Windows server 2003 x64 editions
Hide thumbs Also See for Express5800 140Rd-4:
Table of Contents

Advertisement

8-32
→ The CD-ROM drive of the server may fail if the combination of disk drive, writing software, and
Inserted the correct CD-ROM but the message like the following is displayed:
The CD-ROM is not inserted or the wrong CD-ROM is inserted.
Please insert the correct CD-ROM.
OK
Is the data side of the CD-ROM dirty or injured?
→ Take the CD-ROM out of the CD-ROM drive, confirm that it is not dirty or injured, reset and click
Fail to access the hard disk:
(Refer to the documentation supplied with the disk array controller.)
Is the hard disk applicable to the server?
→ Operation of any device that is not authorized by is not guaranteed.
Is the hard disk properly installed?
→ Make sure to lock the hard disk with the lever on its handle. The hard disk is not connected to the
Fail to access the (internal or external) SCSI devices:
Is the SCSI device applicable to the server?
→ Operation of any SCSI device that is not authorized by is not guaranteed.
Is the cable connection changed?
→ The SCSI connector (B) on the I/O board in the machine can be used for either built-in file devices or
Are SCSI devices properly configured?
→ When the server has external SCSI devices connected, device settings, including SCSI ID and
Are the SCSI controllers (including optional controllers) properly configured?
→ Use the BIOS setup utility for proper configuration of SCSI devices connected to the SCSI connector
CD-R is not correct.
[OK].
internal connector when it is not completely installed (see Chapter 9).
external SCSI devices. The connection to external devices must be switched by modifying cable
connection properly.
terminator, are required. Refer to the manual that comes with the SCSI device for details.
on the I/O board. When the server has an optional SCSI controller installed and SCSI devices
connected to it, use the BIOS setup utility that comes with the optional SCSI controller for proper
configuration. See the manual that comes with the optional SCSI controller for details.

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents