NEC Express5800 140Rd-4 User Manual page 166

5-12
If the procedure of installation is not clear, refer to the installation procedure described in the section "Installation of the
Optional Network Board Driver".
Installation of the Optional Network Board Driver
1.
Start Device Manager.
2.
Click [Network adapters] and double-click [(Network Adapter Name)].
[(Network Adapter Name) Properties] appears.
NOTE: [(Intel(R) PRO/1000...)] is the name of On-Board adapter. All other names show the
Optional Network Board.
3.
Click [Driver] tab and click [Update Driver...].
[Hardware Update Wizard] appears.
4.
Select the [Install from a list or specific location(Advanced)] radio button and click [Next].
5.
Select the [Search for the best driver in these locations] radio button and check off the [Search removable media
(floppy, CD-ROM...)] check box.
6.
Check the [Include this location in the search] check box and when using [Intel Pro/1000 + - Intel Pro/1000 MT Dual
– Intel Pro/1000 MF] specify
[CD-ROM driveletter:\WINNT\DOTNET\BC5\PRO1000\WS03XP32].
When using [INTEL PRO/100+], specify
[CD-ROM driveletter:\WINNT\DOTNET\BC5\PRO100\WS03XP32].
Then click [Next].
7.
Click [Finish].
IMPORTANT: If you want to use optional Network Board INTEL PRO/1000 TX 64-BIT PCI,
open [Advanced] in PROSet window and change [Offload TCP Segmentation] value to "Off".
Installing SCSI Controller Driver (Initio 101/Adaptec 29320)
If you use SCSI controller driver (Initio 101/Adaptec 29320), install it according to the following procedure:
Start [Device Manager] from [Start] menu → [Control Panel] → [Administrative Tools] → [Computer Management].
1.
2.
Double-click the SCSI Controller driver which Device Manager lists as unknown device.
3.
Click [Update Driver].
4.
When the "Update Device Driver Wizard" appears, select "Install from a list or specific location [Advanced]" and
click [Next].
5.
Select "Don't search. I will choose the driver to install" and click [Next].
6.
Click [Have Disk..].
7.
Insert "Windows Server 2003 OEM-DISK for EXPRESSBUILDER" into the floppy disk drive, enter "a:\" into "copy
manufacturer's file from:" and click [OK].
8.
Specify the following driver and click [Next].
– [INITIO INI-A10XU2W PCI SCSI Controller](When Initio 101 board is installed.)
– [Adaptec SCSI Card 29320ALP - Ultra320 SCSI](When Adaptec 29320 board is installed.)
The installation of the driver is completed.
Restart the system according to the message appeared on the screen.