NOTE:
[AddingServices]. [Network Monitor] can monitor the frame (or the
packet) that the computer installing [Network Monitor] sends or
receives. This tool is valuable when analyzing network trouble. For
information on how to install the tool, see the "Setup for
TroubleProcess" later in this document.
Re-install the Network Driver
The network driver will be installed automatically.
Graphics Accelerator Driver
Update Graphics Accelerator Driver Mounted in Standard.
1.
Insert the NEC EXPRESSBUILDER CD-ROM into the CD-ROM drive.
2.
Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer]
3.
Run "SETUP.EXE" in the following directory.
<CD-ROM Drive Letter>:\WINNT\VIDEO\RADEON7000\W2K3\SETUP.EXE
* Install the graphics accelerator driver in the following directory if you communicate
your server with the remote KVM console. (Optional advanced remote management
card (N8115-02) must be installed in your server to use the remote KVM console.)
<CD-ROM Drive Letter>:\N8115-02\VIDEO\RADEON7000\SETUP.EXE
4.
Follow the message to continue the installation.
5.
Remove the NEC EXPRESSBUILDER CD-ROM from the CD-ROM drive, follow the
direction on the screen and restart the system.
We recommend you to add [Network Monitor] at
Appendix D
D-15