Optional Network Board Driver - NEC Express5800 140Rd-4 User Manual

D-8
The [Network Connections] dialog box appears.
2. Right-click [Local Area Connection] and click [Properties] from pop-up menu.
2.
Click [Configure].
The property dialog box for network adapter appears.
3.
Click the [Advanced] and specify the [Link Speed & Duplex] value the same as the value specified for HUB.
4.
Click [OK] on the property dialog box for network adapter.
[When PROSet is installed]
1.
Open the [Device Manager]
2.
Double-click [(Network Adapter Name)] in the list.
3.
Click the [Link] and specify the [Link Speed & Duplex Settings] value the same as the value specified for HUB.
4.
Click [OK].
Also, add or delete any protocols and services if necessary.
You can operate the process on the property dialog box for local area network which can be appeared from [Network and
Dial-up Connection].
NOTE:
We recommend you to add [Network Monitor] at [Adding Services]. [Network Monitor]
can monitor the frame (or the packet) that the computer installing [Network Monitor] sends or
receives. This tool is valuable when analyzing network trouble. For information on how to install
the tool, see the "Setting for Solving Problems" described later in this chapter.

Optional Network Board Driver

Optional Network Board Driver (INTEL PRO/100+ - Intel Pro/1000 + - Intel Pro/1000 MT Dual – Intel
Pro/1000 MF)
If you want to utilize optional Network Board, install the network driver stored in EXPRESSBUILDER CD-ROM.
In case of utilizing Intel Pro/1000 + - Intel Pro/1000 MT Dual – Intel Pro/1000 MF
"CD-ROM Drive Letter:\WINNT\W2K3AMD\NS1\PRO1000\WS03_32E
In case of utilizing INTEL PRO/100+
"CD-ROM Drive Letter:\WINNT\W2K3AMD\NS1\PRO100\WS03_32E"
If the procedure of installation is not clear, refer to the installation procedure described in the section "Installation of the
Optional Network Board Driver".
Installation of the Optional Network Board Driver
1.
Start Device Manager.
2.
Click [Network adapters] and double-click [(Network Adapter Name)].
[(Network Adapter Name) Properties] appears.
NOTE:
[(Intel (R) PRO/1000...)] is the name of On-Board adapter. All other names show the
Optional Network Board.
3.
Click the [Driver] tab and click [Update Driver...].
[Hardware Update Wizard] appears.
4.
Select the [Install from a list or specific location (Advanced)] radio button and click [Next].
5.
Select the [Search for the best driver in these locations] radio button and check off the [Search removable media