Powerofflistshow - Brocade Communications Systems Brocade 8/12c Command Reference Manual

Brocade fabric os command reference manual supporting fabric os v7.0.0 (april 2011)
Hide thumbs Also See for Brocade 8/12c:
Table of Contents

Advertisement

22

powerOffListShow

powerOffListShow
Displays the order in which slots are powered off.
SYNOPSIS
powerofflistshow
DESCRIPTION
Use this command to display the order in which the physical slots are powered off.
Whenever a power supply goes out of service or a field-replaceable unit (FRU) is inserted, the system's
available power is compared to the system's required power to determine if there is enough power to
operate. If less than the required power is available, the power-off list is processed, until there is
sufficient power for the system to operate.
If the system's power supply drops abruptly to insufficient levels, the power-off list cannot be processed.
The sudden lack of power causes the CP board processors to cease executing the firmware.
For example, if only one power supply is available to power a fully loaded system and the power supply
is removed from the chassis, all system operations terminate immediately, and the power-off list cannot
be processed. However, if the system is running on two power supplies (this is not recommended) and
one goes into a predicted fail state (in which the power supply is still supplying power), the power-off list
is processed as described.
NOTES
Command output may vary depending on the hardware platform.
Control processor (CP) blades are not included in the power-off list.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
None
EXAMPLES
To display the slot power off list order:
SEE ALSO
chassisShow, powerOffListSet, psShow, slotPowerOff, slotPowerOn,
856
switch:admin> powerofflistshow
Slot 10 will be powered off 1st
Slot
9 will be powered off 2nd
Slot
8 will be powered off 3rd
Slot
7 will be powered off 4th
Slot
6 will be powered off 5th
Slot
5 will be powered off 6th
Slot
4 will be powered off 7th
Slot
3 will be powered off 8th
Slot
2 will be powered off 9th
Slot
1 will be powered off 10th
slotShow
Fabric OS Command Reference
53-1001764-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fabric os v7.0.0

Table of Contents