Labmaster Setup; Pcie 1 Lane Cable Sync Connection(S) - Teledyne LabMaster 10 Zi Series Getting Started Manual

LabMaster 10 Zi Oscilloscopes

LabMaster Setup

PCIe 1 Lane Cable SYNC Connection(s)

Connect each PCIe 1 Lane Control Input on the back of your 10-xxZi
Acquisition Modules to a PCIe 1 Lane Output on the MCM-Zi Master Control
Module using the PCIe 1 Lane cable(s) provided.
PCIe 1 Lane Cable
On the back of the Master Control Module, plug one end of the PCIe 1 Lane
cable into the PCIe 1 Lane Channel Sync Output (labeled SYNC).
16 922561-00 Rev A