Zooming Waveforms - Teledyne LabMaster 10 Zi Series Getting Started Manual

LabMaster 10 Zi Oscilloscopes

Zooming Waveforms

You can magnify a selected region of a waveform using the Zoom function.
On Zi model oscilloscopes, you can display up to four Zoom (Z1 - Z4) and
eight Math Zoom traces (F1 - F8). You can zoom:

A single channel.

A math or memory trace

Multiple waveforms at once

Segments in a sequence
You can also use the Multi-Zoom Math function to create time-locked zoom
traces for selected waveforms. For more information, refer to Math →
Multi-Zoom).
At any time, you can zoom a portion of a channel waveform or
Memory/Math function trace by touching and dragging a rectangle around
any part of the input waveform. See To Zoom by Touch-and-Drag (on page
102). The zoom trace will size itself to fit the full width of the grid. The
degree of magnification, therefore, will depend on the size of the rectangle
that you draw.
You can also use the front panel Q
multiple zooms, one for each displayed input channel. For more
information, see the To Zoom Multiple Waveforms Quickly (on
page 103) topic.
When you zoom a waveform, a preview of the zoomed area is shown on the
Preview section of the Zx dialog.
100
Z button to create
UICK OOM
922561-00 Rev A