Saving And Recalling Setups - Teledyne LabMaster 10 Zi Series Getting Started Manual

LabMaster 10 Zi Oscilloscopes

Saving and Recalling Setups

The Save/Recall Setup dialogs allow for quick saving and recalling of up to
six oscilloscope panel settings internally on your instrument. If desired, you
can also save and recall your oscilloscope panel settings as an .lss file to a
specific hard disk location, a network location, or USB drive.
Saving Oscilloscope Setup(s)
Access the Save Setup... dialog by either selecting File → Save Setup... from
the menu bar or clicking the Save Instrument Setup button on the main
Save/Recall dialog. Now use one of the following two methods to save
setup(s).
S S ( ) I
AVE ETUP S
1.
Touch inside one of the six SetupX data entry controls in the Save to
Internal Setup... section and providing a name.
2.
Touch its corresponding Save button directly to the left.
Your setup file is then saved to the D:\Internal Setups location on your
instrument and the current date/time is shown above the SetupX data entry
control.
S S ( ) D
AVE ETUP S
1.
Touch the File button on the Save To section on the dialog.
2.
Touch inside the Save files in directory control and provide a path to
the destination folder.
OR
Touch Browse to navigate to the destination folder.
3.
Touch the Save Now button.
140
NTERNALLY ON
F
IRECTLY TO A
Y I
OUR NSTRUMENT
ILE
922561-00 Rev A