Table of Contents
Advertisement
Color
Use this dialog to customize the colors used for Channels, Math, and
Memory traces when shown on your instrument and when used in print
output.
NOTE
: These color settings match a waveform on the grid display (both on-screen
and printed) and show consistently on corresponding
descriptor labels
Channels - Make Screen and Print color selections for C1 through C4 by
touching one of the color swatches. When the Color pop-up is displayed,
use it to specify your desired color.
Math Traces - Make Screen and Print color selection for F1 through F8 by
touching one of the color swatches. When the Color pop-up is displayed,
use it to specify your desired color.
Memory Traces - Make Screen and Print color selection for M1 through M4
by touching one of the color swatches. When the Color pop-up is displayed,
use it to specify your desired color.
Factory default colors - click this button to instantly recall the original color
settings for your instrument.
NOTE
: Print colors are used only when the Colors control is set to Print on the
Hardcopy dialog in
print colors
button is provided on this portion of the dialog. When the button is
touched, a preview is generated on the grid display area. A subsequent touch of the
button closes the preview.
922561-00 Rev A
.
Utilities → Utilities Setup...
Getting Started Manual
dialogs
tables
,
. For convenience, the
trace
, and
Preview
163
Advertisement
Table of Contents
