Table of Contents
Advertisement
LabMaster 10 Zi Oscilloscopes
EN 61000-4-6:2007 RF Conducted Electromagnetic Field, 3 Vrms, 0.15 MHz -
4
80 MHz
EN 61000-4-11:2004 Mains Dips and Interruptions, 0%/1 cycle, 70%/25
cycles, 0%/250 cycles
1
To ensure compliance with all applicable EMC standards, use high quality
shielded interface cables.
2
Emissions which exceed the levels required by this standard may occur
when the oscilloscope is connected to a test object.
3
This product is intended for use in nonresidential areas only. Use in
residential areas may cause electromagnetic interference.
4
Meets Performance Criteria "B" limits of the respective standard: during
the disturbance, product undergoes a temporary degradation or loss of
function or performance which is self-recoverable.
5
Performance Criteria "C" applied for 70%/25 cycle voltage dips and for
0%/250 cycle voltage interruption test levels per EN61000-4-11.
European Contact:
Teledyne LeCroy Europe GmbH
Waldhofer Str 104
D-69123 Heidelberg
Germany
Tel: (49) 6221 82700
A
& N
USTALIA
EW
Oscilloscope complies with the EMC provision of the Radio Communications
Act per the following standards, in accordance with requirements imposed
by Australian Communication and Media Authority (ACMA):
CISPR 11:2003 Radiated and Conducted Emissions, Group 1, Class A, in
accordance with EN61326-1:2006 and EN61326-2-1:2006.
Australia / New Zealand Contacts:
Vicom Australia Ltd.
1064 Centre Road
Oakleigh, South Victoria 3167
Australia
168
4 5
Z
D
EALAND
ECLARATION OF
Vicom New Zealand Ltd.
60 Grafton Road
Auckland
New Zealand
– EMC
C
ONFORMITY
922561-00 Rev A
Advertisement
Table of Contents
