Teledyne LabMaster 10 Zi Series Getting Started Manual page 37

Getting Started Manual
Attach the front panel by inserting the lower part first, sliding the
detachment lever to the left, and then pushing the top in place.
While detached, your front panel can be used as a remote control. Just
connect it to the oscilloscope using the USB - A to USB - Mini B cable
provided.
NOTE
: While a standard front panel comes with your Zi oscilloscope, Teledyne
LeCroy offers additional standard front panels or a 4 channel version to better suit
the way you work.
922561-00 Rev A 29