E-Mail - Teledyne LabMaster 10 Zi Series Getting Started Manual

LabMaster 10 Zi Oscilloscopes

E-Mail

Use the Utilities E-mail dialog to set up e-mail on the oscilloscope.
E-Mail Server- Choose a server protocol from the following options:

MAPI (Messaging Application Programming Interface) is the
Microsoft interface specification that allows different messaging and
workgroup applications (including e-mail, voice mail, and fax) to work
through a single client, such as the Exchange client. MAPI uses the
default Windows e-mail application.

SMTP (Simple Mail Transfer Protocol) is a TCP/IP protocol for sending
messages from one computer to another through a network. This
protocol is used on the Internet to route e-mail. In many cases no
account is needed.
Configuration - Provide values based on your selected server protocol:

If you chose MAPI, touch inside the Originator Address (From:) data
entry field and provide the instrument's e-mail address. Then touch
inside the Default Recipient Address (To:) data entry field and
provide the recipient's e-mail address.

If you chose SMTP, touch inside the SMTP Server data entry field and
provide the name of your server. Touch inside the Originator Address
(From:) data entry field and provide the instrument's e-mail address.
Then touch inside the Default Recipient Address (To:) data entry
field and provide the recipient's e-mail address.
Send Test Mail - Click this button to send a confirmation message to ensure
proper e-mail configuration.
162 922561-00 Rev A