Front Of 10-Xxzi Acquisition Module - Teledyne LabMaster 10 Zi Series Getting Started Manual


The AUX IN connection is for 50 Ω input only.

The PCIe 4 Lane Data Inputs (item 8) also accommodate PCIe
Expansion Slot options for GPIB and LSIB. Option cards must be
specified when ordering and installed at the Teledyne LeCroy factory
into any number of the same five slots used for the Acquisition
Modules.

Front of 10-xxZi Acquisition Module

1. 2.92 mm Inputs
2. 1.85 mm Inputs
(>36 GHz models)
3. AUX IN
NOTE: If your system runs multiple Acquisition Modules, for optimal channel access
and convenience, Teledyne LeCroy recommends stacking the modules on top of
each other on your bench, inside Teledyne LeCroy's available OC910 oscilloscope
cart, or inside of your own rack (modules must be specifically ordered for rack
mounting from the Teledyne LeCroy factory).
922561-00 Rev A
Number and Description
4. AUX OUT
5. Channel Number
Indicators
6. Channel ON/OFF
Buttons
Getting Started Manual
7. Fast Edge Output
8. Ground connection
for wrist strap
11