Standard High Bandwidth Accessories - Teledyne LabMaster 10 Zi Series Getting Started Manual

Standard High Bandwidth Accessories

The following accessories are delivered in a soft accessory case (SAC-01A)
with 50-65 GHz acquisition modules.
10dB Attenuators
(V-V)
V-female to V-female
Barrel Adapters
Hand Wrench
Torque Wrench
USB Memory Stick
922561-00 Rev A
Used instead of an internally switched attenuator
for optimal signal fidelity. Needed when >640mVp-
p signals (>80 mV/div) are input to the acquisition
module.
The native high bandwidth (50-65 GHz) connection
is a male connection. These barrel adapters
provide ability to make a male connection to the
high bandwidth inputs.
Used to stabilize female-female barrel adapter
when attaching it to the high BW
V-male connector. Do not use this to tighten!
Used to tighten or loosen the V-female barrel
adapter from the high bandwidth V-male connector.
It should also be used to tighten cables to the V-
female barrel adapter.
This contains s-parameter files for the 10 dB
attenuators. A future capability to enter an s-
parameter file for the 10dB attenuator (should they
need to be replaced) will be provided so as to
optimize signal fidelity of the high bandwidth inputs.
Getting Started Manual
Qty. 2
Qty. 2
Qty. 1
Qty. 1
Qty. 1
15