Recalling Waveforms - Teledyne LabMaster 10 Zi Series Getting Started Manual

LabMaster 10 Zi Oscilloscopes

Amplitude only - Specifies the output file include amplitude
data for each sample, but not sample time information.

Time and Amplitude - Specifies the output file include both
time and amplitude data for each sample.

With Header - Specifies to include a header with scaling
information.
7. If you selected ASCII, touch the Delimiter control and select a
delimiter character from the pop-up menu. Choose from comma,
space, semicolon, or tab delimiters.
8. Touch the Browse button next to the Save file in directory
control and navigate to the location where you want the file
saved. The file name is assigned automatically and is shown
under the control.
9. Touch the Save Now! button.
AutoSave
You can use the Auto Save feature to automatically save a waveform to disk
after each new trigger.
1. On the Save Waveform dialog, touch one of the Auto Save
buttons.
2. Select Wrap (old files overwritten) or Fill (no files overwritten).
CAUTION. Selecting Fill can use up the hard disk space on
your instrument.

Recalling Waveforms

NOTE
: Only .trc files saved in binary format can be recalled into the oscilloscope.
Access the Recall Waveform dialog by either selecting File → Recall
Waveform from the menu bar or clicking the Recall Waveform button on
the main Save/Recall dialog.
144 922561-00 Rev A