Mpls Ldp Hello Adjacencies; Viewing The Mpls Ldp Hello Adjacencies Window - Cisco 12000 User Manual

Fault Management for MPLS LDP
Label Range Min VCI—The minimum VCI number configured for this range.
Label Range Max VPI—The maximum VPI number configured for this range.
Label Range Max VCI—The maximum VCI number configured for this range.
Storage Type—The storage type for this entry.

MPLS LDP Hello Adjacencies

The LDP operations begin with a discovery (Hello) process during which an LDP entity (a local LSR)
finds a cooperating LDP peer in the network and negotiates basic operating procedures between them.
The recognition and identification of a peer by means of this discovery process results in an Hello
adjacency, which represents the context within which label binding information is exchanged between
the local LSR and its LDP peer. The MPLS LDP Hello Adjacencies window displays a table of hello
adjacencies of the LSR. This window is a read-only window.
The MPLS LDP Hello Adjacencies section covers the following:
•
•

Viewing the MPLS LDP Hello Adjacencies Window

To view the MPLS LDP Hello Adjacencies window, proceed as follows:
Right click on an appropriate object and choose Cisco 12000/10720 Manager> Fault> Chassis>
Step 1
MPLS> MPLS LDP Hello Adjacencies. See
allow you to launch the MPLS LDP Hello Adjacencies window. The MPLS LDP Hello Adjacencies
window appears, with the Hello Adjacencies tab displayed.
Cisco 12000/10700 v3.1.1 Router Manager User Guide
15-26
Viewing the MPLS LDP Hello Adjacencies Window
MPLS LDP Hello Adjacencies Window—Detailed Description
Table 15-1 on page 15-3 for information on which objects
Chapter 15 MPLS Management
OL-4455-01